David Ramsden
2Aug/14

Automating mass Cisco IOS upgrades

This morning I needed to upgrade the IOS on 29 Cisco 3560G switches. Rather than login to each one, clean up the flash storage, FTP on the IOS image and set the boot image, I wrote a simple shell script and used clogin from RANCID to automate this task. Of course, nearly every Network Configuration Management platform that's any good should be able to do this but I prefer the personal touch.

The commands required on the switch were as follows:

First I tell IOS to not prompt on file operations. This makes automation easier as there's no need to deal with questions. Then I clean up the flash storage on the switch by removing any old IOS images. The IOS image is copied from an FTP server to the flash storage. The file prompt is put back to defaults and the boot system variable is set to the new IOS image. Finally the configuration is committed to NVRAM because at some point the switch will need to be reloaded.

The shell script will read in a list of IP addresses to connect to and then using clogin it'll login to each switch and execute the commands above.

The script I wrote is as follows:

A file called ips.txt has the list of IP addresses for the switches (one IP address per line). The commands listed above go in to a file called commands.txt. And lastly there's a file called clogin.txt that contains the login details that clogin needs. This would look like:

This tells clogin that there's no need to enter enable and to first try SSH and followed by telnet.

When the script is run it will grab the first IP address in ips.txt, execute clogin to login to the switch and then execute each command in commands.txt. When clogin exits, the IP address in ips.txt will be removed and placed in to a file called processed.txt. The script then prompts if it should continue to the next IP address, allowing you to review what happened to make sure the IOS image copied on OK.

This allowed me to upgrade 29 switches, whilst watching some morning TV and sipping a coffee with my feet up. All that's required now is a reload of each switch.

Comments (4) Trackbacks (0)
  1. This is a kind of marketing I know, but I just want to tell about a tool I developed for Cisco mass-configuration. We have used this tool for more than 100k (!) devices succesfuly. If you are interested in this topic, please visit http://www.prettygoodterminal.com

  2. Nice post , please when it will be possible post more scripts

  3. Hi.
    shoud i need to configure all the devices as new than ? or configuration will not be touched ? and if all configuration wiioll be erased what is the option to set back old configuration ?
    thx

  4. Nice but I have a Problem I do not have Rancid installed, is there a way to get around using the clogin script?? I have modified the commands script to add config snippets that need to be rolled to a couple hundred Cisco switches.


Leave a comment

No trackbacks yet.